Yes, you can use an off-the-shelf permanent marker, but be careful where you write. The easiest way to label a CD-R is to whip out that permanent marker and write directly on the disc. It’s also a great way to assure that the disc won’t be readable later on.

Can you put labels on CDs?

Use only round labels, specified as CD/DVD, with your discs — this will ensure that your disc is correctly balanced in the drive and the adhesive used on such labels is not harmful to the disc’s data layer. Once applied, labels should never be removed or repositioned, as this may delaminate the disc.

Can I write on my DVD?

Yes, you can write directly on the disc. And yes, you can ruin the disc and maybe the drive when you do that – here’s how to make it work. Use a Sharpie. Other markers may also work fine, but some may not.

How do I print something on a CD?

Select your printer from the printer list. Select CD/DVD or CD/DVD Premium Surface as the Media Type setting. Make sure None is selected as Print Check Pattern setting and click Print. After printing on a CD/DVD, carefully remove the CD/DVD from the CD/DVD tray, and then press the CD Tray button to close the tray.

Can you paint a CD and still play it?

The layer of paint might affect a “slit” CD-player (the ones without tray where the CD gets swallowed in). If I were to paint a CD with acrylic paint, would it be damaging (or even work, for that matter)? It may work, but it will certainly be damaging to your CD/DVD and the CD/DVD drive of the computer.

Can I glue a label on a DVD?

DO NOT USE A STICKY LABEL ON A DVD. No exceptions!

Are DVD labels good?

Paper labels are not recommended for DVD discs. The expansion and contraction of moisture in the paper and the accumulation of heat in a DVD drive can alter the flatness of a disc enough that it falls out of the tilt specification and may not be able to be read.

Which side of the CD can you write on?

A CD is read from and written to (by laser) on one side only; a DVD can be read from or written to on one or both sides, depending on how the disc was manufactured. Recordable DVDs (DVD-R, DVD-RW, DVD-RAM) can be manufactured with one recording layer on each side.

What pen can write on a DVD?

The EMG Optical Media Pen is a recommended writing device for CDs, DVDs, and Blu-rays optical discs. Avoid pens and pencils and other writing devices that require pressure to write. The marker or pen should have a soft tip that requires little pressure to write.

What markers are safe for CDs?

In all cases use a soft, felt-tipped marker. Ballpoint pens should not be used as the sharp tip can damage the disc. Solvent-based inks such as those used in permanent markers might also be more harmful to some types of discs than other ink formulas.

How does Labelflash work?

LabelFlash turns the blue area of the disc clear when the laser works on it, which makes the disc label very readable. Don’t go by this picture’s quality—this is what happens when you find that your poor old digital camera has finally given up the ghost and you have to take pictures with your semi-smart phone.

What is the difference between LabelFlash and LightScribe labels?

LabelFlash discs are a very dark blue, where the most commonly available LightScribe discs are golden (there are both LabelFlash and LightScribe discs that are other colors as well). Both types of labels are monochrome, and neither appears to be better or worse than the other.

How do I put a label on a disc?

Open LabelFlash Index Maker, and select one of the Outer Ring templates. Then click Disc Scan. This will display the files that are on your disc. Then click Config. This time, click on the little box that says [email protected] Mode. That’s what will put the label on your disc.

Who makes Labelflash drives?

Here is the official LabelFlash web site’s list of suppliers. As you can see, LabelFlash drives are made by companies like Pioneer, Sony and Phillips, so although they’re nowhere near as common as LightScribe drives, it’s not because they’re manufactured by fly-by-night organizations.