Shop-Vac®DIY & Workshop Series Wet Dry Vacs The Shop-Vac®12 Gallon* 5.5 Peak HP** Wet / Dry Vacuum features the SVX2 Motor Technology. This new motor has more power and longer motor life when compared to the Shop-Vac®standard 5.5 peak HP** motor. Use this vacuum to clean up your workspace, basement or garage.

How much does a shop vac motor cost?

What’s Popular

What would cause a shop vac to stop working?

Possible Cause(s): Defective switch or defective motor. Note: On Demand Vacs (925-63, 925-64 and 925-65) The vacuum circuit breaker button is triggered and showing out – or no continuity.

How do you fix a shop vac that won’t turn on?

First, test the power switch for continuity to ensure that the motor is getting power. If the power switch has continuity, ensure that the blower wheel turns freely and is clear of obstructions. If power is getting to the motor, and the motor turns freely, but the motor still won’t run, replace the fan motor.

Do shop vacs have brushless motors?

The Shop Vac 12 Gallon 12 Amp SR Motor Industrial Wet/Dry Vac model 9541210 features Shop-Vac’s new brushless Switch Reluctance (SR) high performance motor that gives a powerful 250 CFM air flow, powerful enough for any industrial cleanup while maintaining a super quiet motor.

What is SVX2 motor technology?

The SVX2® advanced motor technology creates a vacuum with more power and longer motor life†. These vacuums have a 35% increase in air watts; when compared to a standard Shop-Vac® motor of equal Peak HP**.

Why did my shop vac loses suction?

The most common causes of loss of suction are dirty filters or a clog in the hose. If a crack or hole is found, replace the hose. If you do not feel suction at the inlet, turn the vacuum off and unplug from the outlet. Follow the steps in the user manual that came with the vac to clean the filter.

How do I get my shop vac to work?

Instructions

1. Remove the Bag. During wet operation, wet/dry vacuums never use collection bags.
2. Change or Remove the Filters.
3. Attach the Wet Nozzle.
4. Plug Into a GFCI Outlet.
5. Vacuum the Water.
6. Filter Out the Debris.
7. Safely Dispose of the Water.
8. Clean and Disinfect the Canister and Accessories.

How do I turn on my shop vac?

Open the vacuum up by unlatching the lid latch by hand on the top of the vacuum. Check that the inlet deflector is facing the bottom of the tank. If it is not, turn it. The inlet deflector is located underneath the power unit assembly and looks like a large, black plastic faucet spout.

Does HP matter in a Shop-Vac?

To get excellent suction power, have a higher HP. If you have already vacuuming stuff, any 1-2 hp vac will do for removing dirt, san, and all types of debris. You are recommended to go for 4-5 hp.