The transmitter box starts to beep to notify you that your dog left the yard. If there is a break in the fence, the transmitter box will beep nonstop until the break is located and repaired. Since the fence line is invisible, the level of difficultly in locating the break in the fence increases.

Why is my petsafe collar beeping but not shocking?

Touch both points on the collar while it is ticking or beeping. If you do not feel a shock, then there may be a problem with the receiver collar. Make sure you touch both points on the receiver at the same time when you hear the collar beeping. It will tell you definitively that the fence is or is not working.

How do you reset an invisible fence transmitter?

Resetting the system can be as simple as replacing the batteries in your transmitter. Bring your dog inside, and turn off the power to the fence. Unplug the transmitter. Look for metal objects around or on top of the fence.

Why is my PetSafe collar beeping but not shocking?

Can you leave a collar on your dog all the time?

Accidents happen and pets get lost, which is why it’s advisable to keep your dog’s collar on whenever possible, especially when you’re walking him on a leash, moving households, or traveling. Still, there are times when it’s perfectly acceptable (and safe) to remove your dog’s collar: When he’s in his crate.

How do I reset my PetSafe?

Press and hold the button on the collar until a beep is heard and the light flashes green to turn the collar on. Press and hold the power button for 10 seconds to reset the collar. The light turns red and the collar turns off. Continue holding the button.

Why is my wireless petsafe collar not working?

Collar Power Use the test light tool or a coin to remove the battery from the collar. Lift the metal tab or spring gently to ensure the battery will firmly touch the tab when installed. Press and hold mode button on collar for 20 seconds. If the collar does not power on, replace the battery with a new RFA-67 battery.

Does the PetSafe in-ground dog fence transmitter work with all dog collars?

The PetSafe In-Ground Dog Fence Transmitter is for All PetSafe or Pet Guardian Brand Dog Fences, it will work with any of the PetSafe or Pet Guardian brand dog fence collars except for the UltraSmart and YardMax collars.

How many acres can the in-ground dog fence replacement transmitter enclose?

The PetSafe In-Ground Dog Fence Replacement Transmitter can enclose up to 10 acres which is approximately 3,200 feet of wire. Was this answer helpful? 16 of 16 Customer (s) found this Answer helpful. Q: Is this new or used?

What is a stubborn dog in-ground fence?

This PetSafe®Stubborn Dog In-Ground Fence™is not a solid barrier. This system is designed to act as a deterrent to remind pets by Static Correction to remain in the boundary established. It is important that you reinforce training with your pet on a regular basis.

Where should I mount the fence transmitter?

† At least 3 feet from large metal objects or appliances as these items may interfere with the signal consistency (1C). Once you have mounted the Fence Transmitter, the Boundary Wire must exit the building. This can be accomplished via a window or through a hole drilled through the wall. Ensure the drill path is clear of any utilities.